Artigos técnicos relacionados [EN]
-
20.06.22
Failure analysis in aluminium turbocharger wheel- Abstract:
This paper presents a failure analysis conducted in aluminium compressor wheels used in diesel turbocharged engines. These wheels were made with machined AA 2618T652 alloy and installed in light truck engines, which were used in rural and industrial atmosphe (...)
-
- 09.06.22
The effect of sulfur on the contact angle between liquid eutectic Fe-V-C alloy and VC substrate and on the microstructure of the alloy - Abstract:
The sessile drop technique was used to evaluate the contact angle between liquid eutectic Fe-11wt%V-2.3wt%C alloy and VC substrate. This alloy solidifies through a eutectic reaction that starts at 1320°C and leads to the formation of the faceted/non-face (...)
-
- 09.06.22
The effect of sulfur on the contact angle between liquid eutectic Fe-V-C alloy and VC substrate and on the microstructure of the alloy - Abstract:
The sessile drop technique was used to evaluate the contact angle between liquid eutectic Fe-11wt%V-2.3wt%C alloy and VC substrate. This alloy solidifies through a eutectic reaction that starts at 1320°C and leads to the formation of the faceted/non-face (...)
-
- 27.05.22
Durbility of concrete structures in marine environment: case study - Abstract:
The durability of concrete structures depends on meeting a series of requirements, design, implementation and maintenance. However, this service is not an easy task. For example, eficência maintenance that should be performed periodically depends on th (...)
-
- 09.02.22
Ensaios de corrosão em meios de etanol: estudo individual dos possíveis contaminantes que constam da norma ASTM D 4806 - Reference:
SANTOS, C.A.L.; PANOSSIAN, Z.; SANTOS,J.V.S; BARBOSA, E.A; PIMENTA,G.S. Ensaios de corrosão em meios de etanol: estudo individual dos possíveis contaminantes que constam da norma ASTM D 4806. In: CONFERÊNCIA SOBRE TECNOLOGIA DE EQUIPAME (...)
